Freon Phase Out | Why Get An A/C Using Puron (R-410a)

Freon Phase Out | Why Get An A/C Using Puron (R-410a)

If you’re experiencing problems with your

and have been told that it’s not a good idea to keep replacing parts because it uses R-22 Freon, were going to explain the difference between

and why it’s better to get a new system.

was the common coolant in most

before 1989, it’s currently being phased out in the United States, as well as any country in the United Nations. The U.N. had a meeting called the Montreal Protocol, it took place in Montreal, Canada and decided the fate of the refrigerant. It was decided that it will be phased out because it’s very harmful to the ozone layer. It’s made up of Hydro-chlorofluorocarbons and over time the chemical compounds will break down and chlorine atoms will float up into the stratosphere and deplete the ozone layer. The devastating effects on the ozone layer are why it was decided to be phased out.

This refrigerant was decided to be used to replace Freon because it doesn’t have chlorine, it only has fluorine and won’t hurt the Ozone layer in the stratosphere. It’s different, it’s known as a Hydro-fluorocarbon opposed to R-22 being a Hydro-

fluorocarbon. It does have a potential for global warming but that doesn’t matter since it allows for higher

of air conditioners. The higher ratings will reduce power consumption which will reduce power plant emissions. R-410a is currently the required HVAC coolant for new equipment since it won’t harm the ozone layer and cause less global warming.

Why A New Air Conditioner With Puron (R-410a)

because the refrigerant can absorb more heat making higher SEER ratings possible.

is becoming more and more expensive as its being phased out. A Freon repair will be expensive.

is dangerous to the ozone layer while R-410a is not.

Even though they both pose a risk for global warming R-410a systems are more

and will use less energy which means less emission from the power plant.